---
title: "5. Examples from BDEF Book"
output:
  bookdown::html_document2:
    base_format: rmarkdown::html_vignette
    fig_caption: yes
    toc: true
    toc_depth: 2
    number_sections: true
pkgdown:
  as_is: true
vignette: >
  %\VignetteIndexEntry{5. Examples from BDEF Book}
  %\VignetteEngine{knitr::rmarkdown}
  %\VignetteEncoding{UTF-8}
---

```{r, include = FALSE}
knitr::opts_chunk$set(
  collapse = TRUE,
  echo = TRUE,
  comment = "#>",
  fig.width = 7,
  fig.height = 4
)
set.seed(0)
```

# Introduction

This vignette uses `bage` to replicate, with a few differences, case studies in the book [Bayesian Demographic Estimation and Forecasting](https://www.bdef-book.com) (BDEF). BDEF uses our R package [demest](https://github.com/statisticsnz/demest). However, we strongly recommend using `bage` instead. `bage` is faster, more stable, and has a nicer interface. We are no longer developing `demest`, and are focusing on `bage`.

In addition to `bage`, the vignette uses the tidyverse packages `dplyr`, `tidyr`, and `ggplot2`.

```{r, message = FALSE}
library(bage)
library(dplyr)
library(tidyr)
library(ggplot2)
```

The vignette includes notes aimed at readers of BDEF, pointing out differences between the models in `bage` and the models in BDEF, and explaning why we made the changes.


> **BDEF Note**
>
> BDEF notes look like this.


# Infant Mortality in Sweden

## Aims and data

We estimate and forecast infant mortality in Swedish counties. Following standard demographic practice we define the infant mortality rate as the probability of dying during the first year of life, calculated using this year's infant deaths and this year's births. (See Chapter 11 of BDEF on why this definition is slightly odd.)

Data for the analysis is in the `swe_infant` dataset in `bage`:
```{r}
swe_infant
```

The figure below shows direct estimates of infant mortality rates. Each panel depicts one county. The panels are ordered from top left to bottom right by the number of births in each county.

```{r, fig.height = 6}
ggplot(swe_infant, aes(x = time, y = deaths / births)) +
  facet_wrap(vars(county)) +
  geom_line()
```

## Initial model

Our model uses default settings for all priors and parameters.

```{r}
mod <- mod_binom(deaths ~ county + time,
                 data = swe_infant,
                 size = births)
mod
```

In this model, deaths in county $c$ during year $t$, denoted $y_{ct}$, are drawn from a binomial distribution with probability $\pi_{ct}$ and trials $w_{ct}$,
\begin{equation}
  y_{ct} \sim \text{binomial}(\pi_{ct}, w_{ct}).
\end{equation}
The probability $\pi_{ct}$ is in turn drawn from a beta distribution, with expected value $\mu_{ct}$ and dispersion parameter $\xi$,
\begin{equation}
  \pi_{ct} \sim \text{Beta}(\xi^{-1} \mu_{ct}, \xi^{-1}[1 - \mu_{ct}])
\end{equation}
Expected value $\mu_{ct}$, transformed on to a logit scale, depends on three terms: an intercept, a 'county' main effect, and a 'time' main effect,
\begin{equation}
  \text{logit} \mu_{ct} = \beta^0 + \beta_c^{\mathcal{C}} + \beta_t^{\mathcal{T}}
\end{equation}
Each of these terms has a prior. The intercept has a 'normal-fixed' prior,
\begin{equation}
  \beta^0 \sim \text{N}(0, 1).
\end{equation}
The county main effect has a 'normal' prior,
\begin{align}
  \beta_c^{\mathcal{C}} & \sim \text{N}(0, \tau_{\mathcal{C}}^2) \\
  \tau_{\mathcal{C}} & \sim \text{N}^+(0, 1).
\end{align}
The time main effect has a random walk prior,
\begin{align}
  \beta_t^{\mathcal{T}} & \sim \text{N}(\beta_{t-1}^{\mathcal{T}}, \tau_{\mathcal{C}}^2) \\
  \tau_{\mathcal{C}} & \sim \text{N}^+(0, 1).
\end{align}
Finally, the dispersion parameter $\xi$ has an expontial prior
\begin{equation}
  \xi \sim \text{Exp}(1).
\end{equation}

> **BDEF Note**
>
> 
This model is slightly different from the infant mortality model in BDEF. The intercept here has a $\text{N}(0,1)$ prior rather than $\text{N}(0,10^2)$, and the time effect has a random walk prior rather than a local level prior. (Local level priors have not yet been implemented in `bage`.)

We fit the model. Fitting in `bage` is a lot faster than fitting in `demest`.
```{r}
mod <- mod |>
  fit()
mod
```

## Extracting parameter estimates

We extract the rates estimates.
```{r}
aug_init <- mod |>
  augment()
aug_init
```

We use function `draws_ci()` from package **rvec** to calculate 95% credible intervals.
```{r}
aug_init <- aug_init |>
  mutate(draws_ci(.fitted))
aug_init
```

And we graph the results.
```{r, fig.height = 7}
ggplot(aug_init, aes(x = time)) +
  facet_wrap(vars(county)) +
  geom_ribbon(aes(ymin = .fitted.lower,
                  ymax = .fitted.upper),
              fill = "lightblue") +
  geom_line(aes(y = .fitted.mid),
            color = "darkblue") +
  geom_point(aes(y = .observed),
             color = "red",
	     size = 0.1) +
  xlab("") +
  ylab("")
```

`components()` returns values for hyper-parameters.
```{r}
comp_init <- mod |>
  components()
comp_init  
```

With help from some tidyverse functions we can extract and graph the intercept, 
```{r, fig.height = 1.2}
intercept <- comp_init |>
  filter(term == "(Intercept)") |>
  mutate(draws_ci(.fitted))

ggplot(intercept, aes(y = level)) +
  geom_pointrange(aes(xmin = .fitted.lower,
                      x = .fitted.mid,
                      xmax = .fitted.upper))
```		      

the county effect, 

```{r}
county_effect <- comp_init |>
  filter(term == "county",
         component == "effect") |>
  rename(county = level) |>
  mutate(draws_ci(.fitted))
  
ggplot(county_effect, aes(y = county)) +
  geom_pointrange(aes(xmin = .fitted.lower,
                      x = .fitted.mid,
		      xmax = .fitted.upper))
```		      

and the time effect.

```{r}
time_effect <- comp_init |>
  filter(term == "time",
         component == "effect") |>
  rename(time = level) |>
  mutate(time = as.integer(time)) |>
  mutate(draws_ci(.fitted))

ggplot(time_effect, aes(x = time)) +
  geom_ribbon(aes(ymin = .fitted.lower,
   	             ymax = .fitted.upper),
	      fill = "lightblue") +
  geom_line(aes(y = .fitted.mid),
            color = "darkblue")
```		      

The county effect and time effect each have `sd` parameters, which we also extract.
```{r}
comp_init |>
  filter(component == "hyper")
```

## An aside on weakly-identified effects

The intercept and time effects from our model both have wide credible intervals. This reflects the fact that they are only weakly identified by the model and data. Adding a small quantity to each element of the time effect, and subtracting the same quantity from the intercept, would make no difference at all to the predictions of the model, and make only a tiny difference to the posterior probabilities. 

In `demest` we deal with the weak identification by standardizing the estimates. Standardization can, however, introduce new complications, and we have not implemented it in `bage`.

When an analysis is focused only on lowest-level rates, probabilities, or means, and higher-level parameters such as time effects are just a means to an end, weak identification rarely causes any problems. If, however, the higher-level parameters are of interest, it may be helpful to experiment with non-default values for parameters. In the model here, for instance, setting the `sd` parameter for the `RW()` prior to 0 fixes the first value of the time effect to 0, leading to a more strongly-identified time effect.

```{r}
mod_ident <- mod_binom(deaths ~ county + time,
                       data = swe_infant,
	 	       size = births) |>
  set_prior(time ~ RW(sd = 0)) |>
  fit()

time_effect_ident <- mod_ident |>
  components() |>
  filter(term == "time",
         component == "effect") |>
  rename(time = level) |>
  mutate(time = as.integer(time)) |>
  mutate(draws_ci(.fitted))

ggplot(time_effect_ident, aes(x = time)) +
  geom_ribbon(aes(ymin = .fitted.lower,
   	             ymax = .fitted.upper),
	      fill = "lightblue") +
  geom_line(aes(y = .fitted.mid),
            color = "darkblue")
```


## Replicate data check

We use a replicate data check to see if, without a county-time interaction, the model is adequately representing cross-county variation in the downward trend in mortality.

Function `replicate_data()` generates replicate datasets.

```{r}
rep_data <- replicate_data(mod)
rep_data
```

For each replicate, we calculate direct estimates of the infant mortality rates, fit a line through these estimates, and collect up the slope.
```{r, fig.height = 3}
calculate_slope <- function(df) coef(lm(rate ~ time, data = df))[["time"]]
slopes <- rep_data |>
  mutate(rate = deaths / births) |>
  group_by(.replicate, county) |>
  nest() |>
  mutate(slope = sapply(data, calculate_slope))

ggplot(slopes, aes(x = .replicate, y = slope)) +
  geom_point(position = position_jitter(width = 0.1)) +
  xlab("") +
  theme(axis.text.x = element_text(angle = 90))
```

The slopes from the original data (on the far left) have aboout the same level of variability as the slopes from the replicate data. The implication is that, even without a county-time interaction, the model is a satisfactory job of representing cross-county variability in the pace of decline.


## Summarizing results through probabilities

We would like to calculate, for each combination of county and time, the probability that the underlying (super-population) infant mortality rate is less than 2.5 per 1000. The `prob()` function from **rvec** makes this easy.

```{r}
prob_25 <- aug_init |>
  mutate(prob = prob(.fitted < 0.0025))

ggplot(prob_25, aes(x = time, y = prob)) +
  facet_wrap(vars(county)) +
  geom_line()
```

## Forecast

We forecast mortality rates through to 2025.  By default, the `forecast()` function returns output that looks like a return value from `augment()`. When `include_estimates` is `TRUE, the output includes historical values.

```{r}
vals_forecast <- mod |>
  forecast(labels = 2016:2025,
           include_estimates = TRUE)
vals_forecast
```

In contrast to the all-defaults model in Chapter 11 of BDEF, the all-defaults model here does not yield exploding prediction intervals.

```{r, fig.height = 7}
vals_forecast <- vals_forecast |>
  mutate(draws_ci(.fitted))
  
ggplot(vals_forecast, aes(x = time)) +
  facet_wrap(vars(county)) +
  geom_ribbon(aes(ymin = .fitted.lower,
                  ymax = .fitted.upper),
             fill = "lightblue") +
  geom_line(aes(y = .fitted.mid),
            color = "darkblue") +
  geom_point(aes(y = .observed),
             color = "red",
	     size = 0.1) +
  xlab("") +
  ylab("")
```


# Life expectancy in Portugal

TODO - write this!

# Health expenditure in the Netherlands

TODO - write this!

# Internal migration in Iceland

TODO - write this!